|
|
|
National Stock Number:
5950-00-368-2798
Federal Supply Class:
5950
National Item Identification Number:
003682798
Description:
COIL,RADIO FREQUENCY
Detail:
An item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. It may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. It is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. It may include tuning devices, integral resistors and capacitors; however, excludes FILTER (as modified). The coil has only two electrical terminals. For items having tapped winding or more than one winding - see TRANSFORMER, RADIO FREQUENCY. For coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see SUPPRESSOR, PARASITIC.
|
Manufacturer Information:
| 4032548-0702 | 06845 | RAYTHEON COMPANY | | 500-2368 | 93292 | CENTRAL COIL CO INC |
|
Techincal Specification:
| ADJUSTMENT DEVICE DRIVE TYPE | SLOTTED SCREW SINGLE COMPONENT | | ADJUSTMENT METHOD AND QUANTITY | 1 ADJUSTABLE CORE SINGLE COMPONENT | | BODY OUTSIDE DIAMETER | 0.300 INCHES MAXIMUM | | COIL FORM TYPE | HOLLOW SINGLE COMPONENT | | CORE CONSTRUCTION | POWDERED SINGLE COMPONENT | | INCLOSURE TYPE | OPEN | | OVERALL LENGTH | 0.547 INCHES MAXIMUM | | MOUNTING BOLT CIRCLE DIAMETER | 0.300 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP | | MOUNTING METHOD | TERMINAL SINGLE GROUP | | QUALITY FACTOR | 37 MINIMUM SINGLE COMPONENT SINGLE WINDING | | RATING METHOD | ELECTRICAL AND WINDING TURNS SINGLE COMPONENT SINGLE WINDING | | RELIABILITY INDICATOR | NOT ESTABLISHED | | WINDING CONDUCTOR SIZE | 0.00500 INCHES AMERICAN WIRE GAGE SINGLE COMPONENT SINGLE WINDING | | TERMINAL TYPE AND QUANTITY | 2 PIN | | TEST DATA DOCUMENT | 06845-4032548 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TURN QUANTITY | 31-1/4 SINGLE COMPONENT SINGLE WINDING |
|
|