| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.984 INCHES MINIMUM AND 2.016 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.734 INCHES MINIMUM AND 1.766 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| DC RESISTANCE RATING IN OHMS | 192.000 SINGLE COMPONENT SINGLE WINDING |
| FREQUENCY RATING | 100.0 HERTZ NOMINAL SINGLE COMPONENT |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| INDUCTANCE TYPE | SWINGING |
| INDUCTANCE RATING | 5.00 HENRY MINIMUM SINGLE COMPONENT SINGLE WINDING |
| OVERALL HEIGHT | 3.125 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| OVERALL LENGTH | 2.750 INCHES MINIMUM AND 2.875 INCHES MAXIMUM |
| OVERALL WIDTH | 2.500 INCHES MINIMUM AND 2.650 INCHES MAXIMUM |
| MAXIMUM OPERATING TEMP | 65.0 CELSIUS |
| MOUNTING FACILITY QUANTITY | 4 SINGLE GROUP |
| MOUNTING METHOD | THREADED STUD SINGLE GROUP |
| NOMINAL THREAD SIZE | 0.164 INCHES SINGLE GROUP |
| RATING METHOD | ELECTRICAL SINGLE COMPONENT SINGLE WINDING |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| WINDING OPERATING CURRENT | 100.0 MILLIAMPERES DC MAXIMUM SINGLE COMPONENT SINGLE WINDING |
| WINDING QUANTITY | 1 SINGLE COMPONENT |
| TERMINAL TYPE AND QUANTITY | 2 TURRET |
| TEST DATA DOCUMENT | 10001-25154741 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD QUANTITY PER INCH | 32 SINGLE GROUP |
| THREAD SERIES DESIGNATOR | UNC SINGLE GROUP |