5950-01-059-6539, TRANSFORMER,AUDIO FREQUENCY

National Stock Number:
5950-01-059-6539

Federal Supply Class:
5950

National Item Identification Number:
010596539

Description:
TRANSFORMER,AUDIO FREQUENCY

Detail:
A transformer which is designed so that part or all of its range of operating frequencies is 20 kilohertz (kilocycles) and below. The maximum value may extend into the radio frequency range. It is generally used in the input, output, amplifier, or oscillator stages of audio and sonar devices.

Manufacturer Information:

4789153 ITEM 1-42	96169	ELECTRIC BOAT CORPORATION
M27/6-01A	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-T-27/6	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-T-27/6A	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
TF4R21AJ004	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
TF4RX16AJ001-A	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

TERMINAL TYPE AND QUANTITY	8 TAB, SOLDER LUG
IMPEDANCE RATING IN OHMS	150.0 NOMINAL SINGLE COMPONENT ALL PRIMARY
	150.0 NOMINAL SINGLE COMPONENT ALL SECONDARY
FREQUENCY RATING	300.0 HERTZ MINIMUM AND
	10.0 KILOHERTZ MAXIMUM SINGLE COMPONENT
MAXIMUM TRANSFORMER POWER RATING	15.0 DECIBELS SINGLE COMPONENT
WINDING SHIELDING METHOD	INTERNAL SHIELD GROUNDED TO CORE AND MOUNTING SINGLE COMPONENT
WINDING FUNCTION AND QUANTITY	2 PRIMARY AND
	2 SECONDARY SINGLE COMPONENT
MOUNTING METHOD	THREADED STUD SINGLE GROUP
MOUNTING FACILITY QUANTITY	4 SINGLE GROUP
THREAD SERIES DESIGNATOR	UNC SINGLE GROUP
NOMINAL THREAD SIZE	0.138 INCHES SINGLE GROUP
THREAD QUANTITY PER INCH	32 SINGLE GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	1.188 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	1.188 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
INCLOSURE TYPE	FULLY INCLOSED
BODY LENGTH	1.625 INCHES NOMINAL
BODY HEIGHT	2.250 INCHES MINIMUM AND
	2.375 INCHES MAXIMUM
BODY WIDTH	1.625 INCHES NOMINAL
RELIABILITY INDICATOR	NOT ESTABLISHED
TEST DATA DOCUMENT	81349-MIL-T-27 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIFICATION/STANDARD DATA	81349-MIL-T-27/6A GOVERNMENT SPECIFICATION
MAXIMUM OPERATING TEMP	105.0 DEG CELSIUS
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE	81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	MIL-T-27/6
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE	M27/6-01A

Click here to Register for Free 30-day Trial