| BODY HEIGHT | 3.750 INCHES MAXIMUM |
| BODY LENGTH | 9.000 INCHES MAXIMUM |
| BODY WIDTH | 2.250 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 8.235 INCHES MINIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP AND 8.265 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.172 INCHES MINIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP AND 1.202 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| FREQUENCY RATING | 60.0 HERTZ NOMINAL SINGLE COMPONENT |
| INCLOSURE TYPE | FULLY INCLOSED |
| INDUCTANCE RATING | 100.00 MICROHENRIES NOMINAL SINGLE COMPONENT ALL WINDING |
| INDUCTANCE TYPE | FIXED |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY QUANTITY | 4 SINGLE GROUP |
| MOUNTING HOLE DIAMETER | 0.275 INCHES MINIMUM SINGLE GROUP AND 0.305 INCHES MAXIMUM SINGLE GROUP |
| MOUNTING METHOD | UNTHREADED HOLE SINGLE GROUP |
| RATING METHOD | ELECTRICAL SINGLE COMPONENT ALL WINDING |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SPECIAL FEATURES | INTERNAL SHIELD BROUGHT OUT TO A TERMINAL |
| SPECIFICATION/STANDARD DATA | 51435-279S008 MANUFACTURERS SOURCE CONTROL |
| WINDING OPERATING CURRENT | 17.0 AMPERES DC MAXIMUM SINGLE COMPONENT ALL WINDING |
| WINDING QUANTITY | 3 SINGLE COMPONENT |
| TERMINAL TYPE AND QUANTITY | 3 THREADED STUD AND 3 WIRE LEAD |
| TEST DATA DOCUMENT | 51435-279S008 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |