|
|
|
National Stock Number:
5950-01-274-6467
Federal Supply Class:
5950
National Item Identification Number:
012746467
Description:
TRANSFORMER,RADIO FREQUENCY
Detail:
An item having either a single tapped winding (autotransformer type), or two or more windings designed to furnish inductive reactance and/or transfer electrical energy in circuits by means of a magnetic field. It is so designed that its entire intended range of operations is above 20 Kilohertz (Kilocycles). The minimum value may extend into the audio frequency range (below 20 Kilohertz). It may include integral capacitors, coils, resistors, and adjustable tuning cores. For items having only two active terminals see COIL, RADIO FREQUENCY. Includes types having windings which may be moved with respect to each other. Excludes TRANSFORMER, DISCRIMINATOR.
|
Manufacturer Information:
| A3033956 | 80063 | US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR | | ST-407 | 05375 | RF MICRO DEVICES, INC. |
|
Techincal Specification:
| BODY HEIGHT | 0.510 INCHES MAXIMUM | | BODY LENGTH | 0.760 INCHES MAXIMUM | | BODY WIDTH | 0.760 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP | | COIL FORM TYPE | SOLID SINGLE COMPONENT | | FREQUENCY RATING | 10.0 KILOHERTZ NOMINAL AND 5.0 MEGAHERTZ MAXIMUM SINGLE COMPONENT | | INCLOSURE TYPE | FULLY INCLOSED | | MAXIMUM OPERATING TEMP | 85.0 CELSIUS | | MOUNTING METHOD | TERMINAL SINGLE GROUP | | RELIABILITY INDICATOR | NOT ESTABLISHED | | WINDING FUNCTION AND QUANTITY | 1 PRIMARY AND 1 SECONDARY SINGLE COMPONENT | | TERMINAL TYPE AND QUANTITY | 5 PIN | | TEST DATA DOCUMENT | 80063-A3033956 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|