| BODY HEIGHT | 2.250 INCHES MINIMUM AND 2.375 INCHES MAXIMUM |
| BODY LENGTH | 1.563 INCHES MINIMUM AND 1.625 INCHES MAXIMUM |
| BODY WIDTH | 1.563 INCHES MINIMUM AND 1.625 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.172 INCHES MINIMUM AND 1.204 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.172 INCHES MINIMUM AND 1.204 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| FREQUENCY RATING | 30.0 HERTZ MINIMUM AND 15.0 KILOHERTZ MAXIMUM SINGLE COMPONENT |
| IMPEDANCE RATING IN OHMS | 5000.0 NOMINAL SINGLE COMPONENT ALL SECONDARY |
| IMPEDANCE RATING IN OHMS | 2500.0 NOMINAL SINGLE COMPONENT ALL PRIMARY |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| MAXIMUM OPERATING TEMP | 105.0 CELSIUS |
| MAXIMUM TRANSFORMER POWER RATING | 1.6 MILLIWATTS SINGLE COMPONENT |
| MOUNTING FACILITY QUANTITY | 4 SINGLE GROUP |
| MOUNTING METHOD | THREADED STUD SINGLE GROUP |
| NOMINAL THREAD SIZE | 0.138 INCHES SINGLE GROUP |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| WINDING FUNCTION AND QUANTITY | 2 PRIMARY AND 2 SECONDARY SINGLE COMPONENT |
| WINDING SHIELDING METHOD | INTERNAL SHIELD BROUGHT OUT TO TERMINAL SINGLE COMPONENT |
| TERMINAL TYPE AND QUANTITY | 9 TURRET |
| TEST DATA DOCUMENT | 49956-G104191 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD SERIES DESIGNATOR | UNC SINGLE GROUP |