|
|
|
National Stock Number:
5950-01-295-5022
Federal Supply Class:
5950
National Item Identification Number:
012955022
Description:
TRANSFORMER,RADIO FREQUENCY
Detail:
An item having either a single tapped winding (autotransformer type), or two or more windings designed to furnish inductive reactance and/or transfer electrical energy in circuits by means of a magnetic field. It is so designed that its entire intended range of operations is above 20 Kilohertz (Kilocycles). The minimum value may extend into the audio frequency range (below 20 Kilohertz). It may include integral capacitors, coils, resistors, and adjustable tuning cores. For items having only two active terminals see COIL, RADIO FREQUENCY. Includes types having windings which may be moved with respect to each other. Excludes TRANSFORMER, DISCRIMINATOR.
|
Manufacturer Information:
| 1809446-1 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | TM0-2-1T/HI-REL | 15542 | SCIENTIFIC COMPONENTS CORP | | TM02-1T/HI-REL | 15542 | SCIENTIFIC COMPONENTS CORP | | TM02-1T | Z3522 | BAE SYSTEMS AUSTRALIA LIMITED |
|
Techincal Specification:
| BODY HEIGHT | 0.240 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | BODY LENGTH | 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | BODY WIDTH | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM | | FEATURES PROVIDED | TINNED WIRE LEADS | | FREQUENCY RATING | 70.0 KILOHERTZ MINIMUM AND 200.0 MEGAHERTZ MAXIMUM SINGLE COMPONENT | | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | VIBRATION RESISTANT AND HUMIDITY RESISTANT | | INCLOSURE TYPE | HERMETICALLY SEALED | | MAXIMUM OPERATING TEMP | 100.0 CELSIUS | | MOUNTING METHOD | TERMINAL SINGLE GROUP | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SPECIAL FEATURES | PINS 7 AND 8 CASE GROUNDED; IMPEDANCE RATIO 2 TO 1 | | WINDING FUNCTION AND QUANTITY | 1 PRIMARY AND 1 SECONDARY SINGLE COMPONENT | | TERMINAL TYPE AND QUANTITY | 5 PIN | | TEST DATA DOCUMENT | 03956-1809446 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|