| BODY HEIGHT | 0.830 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| FREQUENCY RATING | 400.0 HERTZ MINIMUM AND 10.0 KILOHERTZ MAXIMUM SINGLE COMPONENT |
| IMPEDANCE RATING IN OHMS | 500.0 NOMINAL SINGLE COMPONENT SINGLE SECONDARY |
| IMPEDANCE RATING IN OHMS | 70.0 NOMINAL SINGLE COMPONENT SINGLE PRIMARY |
| INCLOSURE TYPE | FULLY INCLOSED |
| OVERALL LENGTH | 1.400 INCHES NOMINAL |
| OVERALL WIDTH | 0.860 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| MOUNTING FACILITY QUANTITY | 2 SINGLE GROUP |
| MOUNTING HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.096 INCHES MAXIMUM SINGLE GROUP |
| MOUNTING METHOD | UNTHREADED HOLE SINGLE GROUP |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| WINDING FUNCTION AND QUANTITY | 1 PRIMARY AND 1 SECONDARY SINGLE COMPONENT |
| WINDING OPERATING CURRENT | 93.5 MILLIAMPERES AC MINIMUM AND 114.3 MILLIAMPERES AC MAXIMUM SINGLE COMPONENT SINGLE SECONDARY |
| TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81755-C10961 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |