| BODY LENGTH | 1.880 INCHES MAXIMUM |
| BODY WIDTH | 1.740 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.365 INCHES MINIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP AND 1.385 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.990 INCHES MINIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP AND 1.010 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| FREQUENCY RATING | 15.0 KILOHERTZ NOMINAL SINGLE COMPONENT |
| INCLOSURE TYPE | FULLY INCLOSED |
| NOMINAL THREAD SIZE | 0.112 INCHES SINGLE GROUP |
| OVERALL HEIGHT | 2.650 INCHES MAXIMUM |
| MAXIMUM OPERATING TEMP | 170.0 DEG CELSIUS |
| MOUNTING FACILITY QUANTITY | 4 SINGLE GROUP |
| MOUNTING METHOD | THREADED HOLE SINGLE GROUP |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| THREAD SERIES DESIGNATOR | UNC SINGLE GROUP |
| WINDING FUNCTION AND QUANTITY | 1 PRIMARY SINGLE COMPONENT AND 2 SECONDARY SINGLE COMPONENT |
| WINDING OPERATING CURRENT | 15.0 MILLIAMPERES AC NOMINAL SINGLE COMPONENT 2ND SECONDARY |
| WINDING OPERATING CURRENT | 21.5 AMPERES AC NOMINAL SINGLE COMPONENT 1ST SECONDARY |
| WINDING OPERATING CURRENT | 750.0 MILLIAMPERES DC MAXIMUM SINGLE COMPONENT SINGLE PRIMARY |
| WINDING OPERATING VOLTAGE | 20.50 AC VOLTS NOMINAL SINGLE COMPONENT 1ST SECONDARY |
| WINDING OPERATING VOLTAGE | 17.68 AC VOLTS NOMINAL SINGLE COMPONENT 2ND SECONDARY |
| WINDING OPERATING VOLTAGE | 5.30 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY AND 10.61 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY AND 106.05 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY AND 111.35 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY AND 116.66 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY |
| WINDING SHIELDING METHOD | INTERNAL SHIELD BROUGHT OUT TO TERMINAL SINGLE COMPONENT |
| TERMINAL TYPE AND QUANTITY | 14 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 10001-2916253 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |