| BODY HEIGHT | 1.445 INCHES MINIMUM AND 1.455 INCHES MAXIMUM |
| BODY LENGTH | 2.230 INCHES MINIMUM AND 2.270 INCHES MAXIMUM |
| BODY WIDTH | 2.230 INCHES MINIMUM AND 2.270 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.945 INCHES MINIMUM AND 1.955 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.945 INCHES MINIMUM AND 1.955 INCHES MAXIMUM SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| FREQUENCY RATING | 67.0 KILOHERTZ NOMINAL SINGLE COMPONENT |
| INCLOSURE TYPE | FULLY INCLOSED |
| INPUT-OUTPUT PHASE RELATIONSHIP | SINGLE PHASE TO SINGLE PHASE SINGLE COMPONENT |
| MOUNTING FACILITY QUANTITY | 4 SINGLE GROUP |
| MOUNTING METHOD | THREADED HOLE SINGLE GROUP |
| NOMINAL THREAD SIZE | 0.112 INCHES SINGLE GROUP |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TERMINAL TYPE AND QUANTITY | 12 PIN |
| TEST DATA DOCUMENT | 04939-717601563 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SPECIAL FEATURES | TERMINALS 3 AND 3A ARE CONNECTED; TERMINALS 5 AND 5A ARE CONNECTED; TERMINALS 6 AND 6A ARE CONNECTED; TERMINALS 8 AND 8A ARE CONNECTED |
| THREAD SERIES DESIGNATOR | UNC SINGLE GROUP |
| WINDING FUNCTION AND QUANTITY | 1 PRIMARY AND 2 SECONDARY SINGLE COMPONENT |
| WINDING OPERATING CURRENT | 1.3 AMPERES AC NOMINAL SINGLE COMPONENT 2ND SECONDARY |
| WINDING OPERATING CURRENT | 4.5 AMPERES AC NOMINAL SINGLE COMPONENT 1ST SECONDARY |
| WINDING OPERATING VOLTAGE | 20.50 AC VOLTS NOMINAL SINGLE COMPONENT 1ST SECONDARY |
| WINDING OPERATING VOLTAGE | 23.00 AC VOLTS NOMINAL SINGLE COMPONENT SINGLE PRIMARY |
| WINDING OPERATING VOLTAGE | 37.58 AC VOLTS NOMINAL SINGLE COMPONENT 2ND SECONDARY |
| WINDING SHIELDING METHOD | INTERNAL SHIELD GROUNDED TO INCLOSURE SINGLE COMPONENT |