| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.200 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.200 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| DC RESISTANCE RATING IN OHMS | 0.022 SINGLE COMPONENT SINGLE PRIMARY |
| DC RESISTANCE RATING IN OHMS | 0.022 SINGLE COMPONENT SINGLE SECONDARY |
| INCLOSURE TYPE | FULLY INCLOSED |
| INDUCTANCE RATING | 80.00 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE PRIMARY |
| INDUCTANCE RATING | 80.00 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE SECONDARY |
| OVERALL HEIGHT | 0.440 INCHES MAXIMUM |
| OVERALL LENGTH | 0.350 INCHES NOMINAL |
| OVERALL WIDTH | 0.350 INCHES NOMINAL |
| MAXIMUM OPERATING TEMP | 130.0 CELSIUS |
| MOUNTING METHOD | TERMINAL SINGLE GROUP |
| PRIMARY TO SECONDARY TURN RATIO | 1 TO 1 SINGLE COMPONENT |
| PULSE REPETITION RATE | 250.0 KILOHERTZ SINGLE COMPONENT |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| WINDING FUNCTION AND QUANTITY | 1 PRIMARY AND 1 SECONDARY SINGLE COMPONENT |
| WINDING OPERATING CURRENT | 141.4 MILLIAMPERES AC NOMINAL SINGLE COMPONENT SINGLE SECONDARY |
| WINDING OPERATING CURRENT | 176.7 MILLIAMPERES AC MAXIMUM SINGLE COMPONENT SINGLE PRIMARY |
| TERMINAL TYPE AND QUANTITY | 4 PIN |
| TEST DATA DOCUMENT | 33604-2-18978 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |