| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.000 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.190 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| DC RESISTANCE RATING IN OHMS | 0.0035 SINGLE COMPONENT SINGLE WINDING |
| FREQUENCY RATING | 10.0 KILOHERTZ NOMINAL SINGLE COMPONENT |
| INCLOSURE TYPE | FULLY INCLOSED |
| INDUCTANCE RATING | 4.50 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING |
| INDUCTANCE TYPE | FIXED |
| OVERALL HEIGHT | 0.730 INCHES MAXIMUM |
| OVERALL LENGTH | 1.275 INCHES MAXIMUM |
| OVERALL WIDTH | 0.440 INCHES NOMINAL |
| MAXIMUM OPERATING TEMP | 130.0 CELSIUS |
| MOUNTING FACILITY QUANTITY | 2 SINGLE GROUP |
| MOUNTING METHOD | THREADED HOLE SINGLE GROUP |
| NOMINAL THREAD SIZE | 0.112 INCHES SINGLE GROUP |
| RATING METHOD | ELECTRICAL SINGLE COMPONENT SINGLE WINDING |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| WINDING OPERATING CURRENT | 15.0 AMPERES DC MAXIMUM SINGLE COMPONENT SINGLE WINDING |
| WINDING QUANTITY | 1 SINGLE COMPONENT |
| TERMINAL TYPE AND QUANTITY | 2 TURRET |
| TEST DATA DOCUMENT | 33604-2-18987 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD SERIES DESIGNATOR | UNC SINGLE GROUP |