| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.950 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.500 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| DC RESISTANCE RATING IN OHMS | 0.250 SINGLE COMPONENT SINGLE WINDING |
| FREQUENCY RATING | 800.0 HERTZ NOMINAL SINGLE COMPONENT |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND FUNGUS RESISTANT AND VIBRATION RESISTANT AND FLAME RESISTANT |
| INCLOSURE TYPE | FULLY INCLOSED |
| INDUCTANCE TYPE | FIXED |
| INDUCTANCE RATING | 780.00 MICROHENRIES MINIMUM SINGLE COMPONENT SINGLE WINDING |
| OVERALL HEIGHT | 1.500 INCHES MAXIMUM |
| OVERALL LENGTH | 1.250 INCHES MAXIMUM |
| OVERALL WIDTH | 0.800 INCHES MAXIMUM |
| MAXIMUM OPERATING TEMP | 130.0 CELSIUS |
| MOUNTING FACILITY QUANTITY | 4 SINGLE GROUP |
| MOUNTING METHOD | THREADED HOLE SINGLE GROUP |
| NOMINAL THREAD SIZE | 0.112 INCHES SINGLE GROUP |
| RATING METHOD | ELECTRICAL SINGLE COMPONENT SINGLE WINDING |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| WINDING OPERATING CURRENT | 1.9 AMPERES DC MAXIMUM SINGLE COMPONENT SINGLE WINDING |
| WINDING QUANTITY | 1 SINGLE COMPONENT |
| TERMINAL TYPE AND QUANTITY | 2 TURRET |
| TEST DATA DOCUMENT | 17863-7137148 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD SERIES DESIGNATOR | UNC SINGLE GROUP |