|
|
|
National Stock Number:
5955-00-583-0111
Federal Supply Class:
5955
National Item Identification Number:
005830111
Description:
CRYSTAL UNIT,QUARTZ
Detail:
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
|
Manufacturer Information:
| 119407 | 06481 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 290-4569-00 | 13499 | ROCKWELL COLLINS, INC. | | 290-4569-000 | 13499 | ROCKWELL COLLINS, INC. | | CR61/U36M66666 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-3098/39 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-3098/39 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DRIVE LEVEL RATING | 0.8 MILLIWATTS MINIMUM AND 1.2 MILLIWATTS MAXIMUM | | BODY THICKNESS | 0.150 INCHES MAXIMUM | | BODY WIDTH | 0.402 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.192 INCHES NOMINAL | | CIRCUIT RESONANCE | SERIES RESONANCE | | CONTROLLED REFERENCE TEMP | 85.0 CELSIUS | | EQUIVALENT RESISTANCE VALUE IN OHMS | 40.0 MAXIMUM | | FREQUENCY STABILITY IN PERCENT | -0.0005 TO 0.0005 | | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.008 TO 0.008 | | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.002 TO 0.002 | | OVERALL LENGTH | 0.530 INCHES MAXIMUM | | OVERALL THICKNESS | 0.183 INCHES MAXIMUM | | OVERALL WIDTH | 0.435 INCHES MAXIMUM | | MODE OF OSCILLATION | THIRD OVERTONE | | OPERABLE TEMP RANGE | -55.0 TO 80.0 CELSIUS | | OPERATING TEMP RANGE | +80.0 TO 90.0 CELSIUS | | SHUNT CAPACITANCE IN PICOFARADS | 7.0 MAXIMUM | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-3098/39 GOVERNMENT SPECIFICATION | | SPECIFIED FREQUENCY | 36.66666 MEGAHERTZ | | STYLE DESIGNATOR | OVAL BODY, WIRE LEADS | | TERMINAL DIAMETER | 0.017 INCHES NOMINAL | | TERMINAL LENGTH | 0.500 INCHES MINIMUM | | TEST DATA DOCUMENT | 81349-MIL-C-3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|