|
|
|
National Stock Number:
5955-00-945-1730
Federal Supply Class:
5955
National Item Identification Number:
009451730
Description:
CRYSTAL UNIT,QUARTZ
Detail:
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
|
Manufacturer Information:
| CR-38A/U61.000KHZ | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CR38A/U61K00000 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-3098/18 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC3098-18 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DRIVE LEVEL RATING | 0.1000 MILLIWATTS NOMINAL AND 0.0999 MILLIWATTS MINIMUM AND 0.1001 MILLIWATTS MAXIMUM | | BODY LENGTH | 1.526 INCHES NOMINAL | | BODY THICKNESS | 0.317 INCHES NOMINAL | | BODY WIDTH | 0.725 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.486 INCHES NOMINAL | | CIRCUIT RESONANCE | ANTIRESONANCE | | EQUIVALENT RESISTANCE VALUE IN OHMS | 100000.0 NOMINAL | | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.012 TO 0.012 AND -0.050 TO 0.050 | | LOAD CAPACITANCE IN PICOFARADS | 19.5 MINIMUM AND 20.5 MAXIMUM | | OVERALL LENGTH | 1.874 INCHES NOMINAL | | OVERALL THICKNESS | 0.352 INCHES NOMINAL | | OVERALL WIDTH | 0.757 INCHES NOMINAL | | MATERIAL | GLASS COVER, HOLDER | | MODE OF OSCILLATION | FUNDAMENTAL | | OPERATING TEMP RANGE | -40.0 TO 70.0 CELSIUS | | SHUNT CAPACITANCE IN PICOFARADS | 4.0 MINIMUM AND 5.4 MAXIMUM | | SPECIFIED FREQUENCY | 61.000 KILOHERTZ | | STYLE DESIGNATOR | TUBE BODY, WIRE LEADS | | TERMINAL DIAMETER | 0.050 INCHES NOMINAL | | TERMINAL LENGTH | 0.238 INCHES NOMINAL | | TEST DATA DOCUMENT | 81349-MILC3098/55 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|