| CURRENT RATING PER CHARACTERISTIC | 1.00 AMPERES SOURCE CUTOFF CURRENT MINIMUM AND 3.00 AMPERES SOURCE CUTOFF CURRENT MAXIMUM |
| JOINT ELECTRONIC DEVICE ENGINEERING COUNCIL/JEDEC/CASE OUTLINE DESIGNATION | TO-220 |
| INTERNAL CONFIGURATION | JUNCTION CONTACT |
| III SEMICONDUCTOR MATERIAL | SILICON |
| INCLOSURE MATERIAL | PLASTIC |
| POWER RATING PER CHARACTERISTIC | 40.0 WATTS SMALL-SIGNAL INPUT POWER, COMMON-COLLECTOR ABSOLUTE |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 150.0 DEG CELSIUS JUNCTION |
| MOUNTING FACILITY QUANTITY | 1 |
| MOUNTING METHOD | UNTHREADED HOLE |
| OVERALL HEIGHT | 0.160 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| OVERALL LENGTH | 0.575 INCHES MINIMUM AND 0.600 INCHES MAXIMUM |
| OVERALL WIDTH | 0.395 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| SPECIAL FEATURES | JUNCTION PATTERN ARRANGEMENT: NPN |
| VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | 140.0 MAXIMUM COLLECTOR TO BASE VOLTAGE, DC AND 100.0 MAXIMUM COLLECTOR TO EMITTER VOLTAGE/STATIC/BASE OPEN AND 6.5 MAXIMUM EMITTER TO BASE VOLTAGE, DC |
| TERMINAL TYPE AND QUANTITY | 3 UNINSULATED WIRE LEAD |
| TEST DATA DOCUMENT | 80009-151-0476-00 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |