| CURRENT RATING PER CHARACTERISTIC | -2.00 AMPERES SOURCE CUTOFF CURRENT MINIMUM AND -5.00 AMPERES SOURCE CUTOFF CURRENT MAXIMUM |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| JOINT ELECTRONIC DEVICE ENGINEERING COUNCIL/JEDEC/CASE OUTLINE DESIGNATION | TO-59-1 |
| INTERNAL CONFIGURATION | JUNCTION CONTACT |
| III SEMICONDUCTOR MATERIAL | SILICON |
| INCLOSURE MATERIAL | METAL |
| POWER RATING PER CHARACTERISTIC | 50.0 WATTS SMALL-SIGNAL INPUT POWER, COMMON-COLLECTOR PRESET |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING TEMP PER MEASUREMENT POINT | 200.0 DEG CELSIUS AMBIENT AIR |
| MOUNTING FACILITY QUANTITY | 1 |
| MOUNTING METHOD | THREADED STUD |
| NOMINAL THREAD SIZE | 0.190 INCHES |
| OVERALL LENGTH | 0.320 INCHES MINIMUM AND 0.468 INCHES MAXIMUM |
| OVERALL WIDTH ACROSS FLATS | 0.424 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| SPECIAL FEATURES | JUNCTION PATTERN ARRANGEMENT: PNP |
| VOLTAGE RATING IN VOLTS PER CHARACTERISTIC | -100.0 MAXIMUM COLLECTOR TO EMITTER REVERSE VOLTAGE, WITH BASE SHORT-CIRCUITED TO EMITTER AND -80.0 MAXIMUM COLLECTOR TO EMITTER VOLTAGE/STATIC/BASE OPEN AND -5.5 MAXIMUM EMITTER TO BASE VOLTAGE, STATIC, COLLECTOR OPEN |
| TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 28009-16610340 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD SERIES DESIGNATOR | UNF |