5961-01-279-8042, SEMICONDUCTOR DEVICE,THYRISTOR

5961-01-279-8041 SEMICONDUCTOR DEVICE,DIODE

National Stock Number:
5961-01-279-8042

Federal Supply Class:
5961

National Item Identification Number:
012798042

Description:
SEMICONDUCTOR DEVICE,THYRISTOR

Detail:
A bistable semiconductor device comprising three or more junctions which is normally a nonconductor until the application of a signal to a gate terminal, at which time the device switches to the conductive state. Includes devices capable of being switched back to the nonconductive state upon application of a different signal to the same or another gate terminal. May or may not include mounting hardware and/or heatsink. For solid state devices which are responsive to visible or infrared radiant energy, see SEMICONDUCTOR DEVICE, PHOTO.

Manufacturer Information:

JANTX2N2326S	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
JANTX2N2326S	81350	JOINT ARMY-NAVY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-PRF-19500/276	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-S-19500/276	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

ELECTRODE INTERNALLY-ELECTRICALLY CONNECTED TO CASE	ANODE
CURRENT RATING PER CHARACTERISTIC	2.00 MILLIAMPERES MAXIMUM HOLDING CURRENT, DC AND 0.22 AMPERES MAXIMUM AVERAGE ON-STATE CURRENT, 180 DEGREES CONDUCTION ANGLE, AVERAGE OVER A FULL 60-HZ CYCLE
FEATURES PROVIDED	QUALITY ASSURANCE LEVEL TX
FUNCTION FOR WHICH DESIGNED	REVERSE BLOCKING
INTERNAL CONFIGURATION	JUNCTION CONTACT
JOINT ELECTRONIC DEVICE ENGINEERING COUNCIL/JEDEC/CASE OUTLINE DESIGNATION	TO-5
OVERALL DIAMETER	0.335 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
OVERALL LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
MAXIMUM OPERATING TEMP PER MEASUREMENT POINT	125.0 CELSIUS AMBIENT AIR
MOUNTING METHOD	TERMINAL
SEMICONDUCTOR MATERIAL	SILICON
SPECIAL FEATURES	JUNCTION PATTERN ARRANGEMENT: PNPN
SPECIFICATION/STANDARD DATA	81349-MIL-S-19500/276 GOVERNMENT SPECIFICATION
TERMINAL LENGTH	0.500 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY	3 UNINSULATED WIRE LEAD
TEST DATA DOCUMENT	81349-MIL-S-19500 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
VOLTAGE RATING IN VOLTS PER CHARACTERISTIC	2.2 MAXIMUM FORWARD VOLTAGE, PEAK AND 1.0 MAXIMUM GATE TRIGGER VOLTAGE, DC

Click here to Register for Free 30-day Trial