|
|
|
National Stock Number:
5962-01-028-6121
Federal Supply Class:
5962
National Item Identification Number:
010286121
Description:
MICROCIRCUIT,DIGITAL
Detail:
A microcircuit specifically designed to generate, modify, or process electrical signals which operate with two distinct or binary states. These states are commonly referred to as on and off, true and false, high and low, or 1 and 0.
|
Manufacturer Information:
| 308711-2 | 15280 | NORTHROP GRUMMAN SYSTEMS CORPORATION DIV ES DEFENSIVE SYSTEMS DIVISION | | 308711-2 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 54S253DMQB | 07263 | FAIRCHILD SEMICONDUCTOR CORP | | 48-055226-02 | 15280 | NORTHROP GRUMMAN SYSTEMS CORPORATION DIV ES DEFENSIVE SYSTEMS DIVISION | | 48-055226-02 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 4004958-01 | K1182 | THALES UK LIMITED DBA THALES UK LTDTRAINING AND SIMULATION | | SNJ54S253J | 01295 | TEXAS INSTRUMENTS INCORPORATED | | SN54S253J-B | 34335 | ADVANCED MICRO DEVICES, INC. | | SN74S253N | 34335 | ADVANCED MICRO DEVICES, INC. | | 99092936 | F6481 | THALES SA |
|
Techincal Specification:
| BODY HEIGHT | 0.120 INCHES MINIMUM AND 0.185 INCHES MAXIMUM | | BODY LENGTH | 0.870 INCHES MAXIMUM | | BODY WIDTH | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM | | DESIGN FUNCTION AND QUANTITY | 2 MULTIPLEXER, FOUR TO ONE LINE | | FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND SCHOTTKY AND W/DISABLE AND W/ENABLE AND 3-STATE OUTPUT | | INCLOSURE CONFIGURATION | DUAL-IN-LINE | | INCLOSURE MATERIAL | CERAMIC AND GLASS | | INPUT CIRCUIT PATTERN | 12 INPUT | | OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS | | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC | | MAXIMUM POWER DISSIPATION RATING | 275.0 MILLIWATTS | | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -0.5 VOLTS MINIMUM POWER SOURCE AND 5.5 VOLTS MAXIMUM POWER SOURCE | | STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS | | TERMINAL TYPE AND QUANTITY | 16 PRINTED CIRCUIT | | TERMINAL SURFACE TREATMENT | SOLDER | | TEST DATA DOCUMENT | 15786-308711 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|