| BODY HEIGHT | 0.185 INCHES MAXIMUM |
| BODY LENGTH | 0.750 INCHES MINIMUM AND 0.785 INCHES MAXIMUM |
| BODY WIDTH | 0.245 INCHES MINIMUM AND 0.271 INCHES MAXIMUM |
| CASE OUTLINE SOURCE AND DESIGNATOR | TO-116 JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| DESIGN FUNCTION AND QUANTITY | 2 RECEIVER, LINE |
| FEATURES PROVIDED | BIPOLAR AND COMPATIBLE DTL AND DARLINGTON OUTPUTS AND ELECTROSTATIC SENSITIVE AND HERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/ENABLE AND W/INDEPENDENT OUTPUTS AND W/RESISTOR AND WIRE-OR OUTPUTS AND 2-STATE OUTPUT |
| INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| INCLOSURE MATERIAL | CERAMIC |
| INPUT CIRCUIT PATTERN | DUAL 4 INPUT |
| MAXIMUM POWER DISSIPATION RATING | 670.0 MILLIWATTS |
| OPERATING TEMP RANGE | -0.0 TO 70.0 CELSIUS |
| OUTPUT LOGIC FORM | DIODE-TRANSISTOR LOGIC |
| STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TERMINAL TYPE AND QUANTITY | 14 PRINTED CIRCUIT |
| TEST DATA DOCUMENT | 90536-7903776 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -0.5 VOLTS MINIMUM POWER SOURCE AND 7.0 VOLTS MAXIMUM POWER SOURCE |