| BODY HEIGHT | 0.150 INCHES MAXIMUM |
| BODY LENGTH | 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| BODY WIDTH | 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| CURRENT RATING PER CHARACTERISTIC | 105.00 MILLIAMPERES MAXIMUM TOTAL SUPPLY |
| DESIGN FUNCTION AND QUANTITY | 1 AMPLIFIER, RADIO FREQUENCY |
| FEATURES PROVIDED | ELECTROSTATIC SENSITIVE AND FIXED GAIN |
| INCLOSURE CONFIGURATION | FLAT PACK |
| INPUT CIRCUIT PATTERN | 1 INPUT |
| OVERALL HEIGHT | 0.150 INCHES MAXIMUM |
| OVERALL LENGTH | 1.262 INCHES MINIMUM |
| OVERALL WIDTH | 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| OPERATING TEMP RANGE | -54.0 TO 85.0 CELSIUS |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | MICROCIRCUIT,LINEAR,HYBRID,RFAMP |
| SPECIAL FEATURES | ESD;FREQ. RANGE 10-200MHZ;INPUT AND OUTPUT IMPEDANCE 50 OHMS |
| SPECIAL TEST FEATURES | REVERSE ISOLATION 20-90MHZ 30DB MIN OR 10-200MHZ 25DB MIN |
| STORAGE TEMP RANGE | -54.0 TO 125.0 CELSIUS |
| SUPPLEMENTARY FEATURES | PINS 2,3,4,5,7,8,9 ARE GROUNDED |
| TERMINAL TYPE AND QUANTITY | 10 PIN |
| TEST DATA DOCUMENT | 81349-MIL-38510 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 81349-MILSTD883 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). AND 82577-H990430 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 11.5 VOLTS MINIMUM POSITIVE POWER SUPPLY SPAN AND 12.5 VOLTS MAXIMUM POSITIVE POWER SUPPLY SPAN |