|
|
|
National Stock Number:
5970-00-238-5853
Federal Supply Class:
5970
National Item Identification Number:
002385853
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 12B10931-9 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| CHAMFER ANGLE IN DEG | 100.0 | | INSIDE DIAMETER | 0.165 INCHES MINIMUM AND 0.171 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.620 INCHES NOMINAL | | OVERALL HEIGHT | 0.085 INCHES NOMINAL | | MATERIAL | PLASTIC PHENOLIC OVERALL | | SPECIAL FEATURES | CHAMFERED ON ONE SIDEONLY | | STYLE DESIGNATOR | ROUND, FLAT |
|
|