|
|
|
National Stock Number:
5970-00-248-1765
Federal Supply Class:
5970
National Item Identification Number:
002481765
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| C13562-1 | 14237 | CONTINENTAL ELECTRIC CO INC | | C13562-1 | 7H468 | CONTINENTAL ELECTRIC MOTORS INC. | | C48190-1 | 14237 | CONTINENTAL ELECTRIC CO INC | | C48190-1 | 7H468 | CONTINENTAL ELECTRIC MOTORS INC. |
|
Techincal Specification:
| FIRST HOLE LENGTH | 0.812 INCHES MINIMUM AND 0.817 INCHES MAXIMUM | | FIRST HOLE WIDTH | 0.687 INCHES MINIMUM AND 0.692 INCHES MAXIMUM | | MATERIAL AND LOCATION | OVERALL PLASTIC, MELAMINE, MIL-P-15037, TYPE GME-CANCELLED/REPLACED BY MIL-I-24768/1 | | OUTSIDE DIAMETER | 2.000 INCHES NOMINAL | | OVERALL HEIGHT | 0.125 INCHES NOMINAL | | SPECIAL FEATURES | RADIUS EACH END CENTER HOLE MINUS 0.405 PLUS 0.411 | | STYLE DESIGNATOR | ROUND, FLAT |
|
|