|
|
|
National Stock Number:
5970-00-729-0632
Federal Supply Class:
5970
National Item Identification Number:
007290632
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 9030897 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND |
|
Techincal Specification:
| INSIDE DIAMETER | 2.320 INCHES MINIMUM AND 2.420 INCHES MAXIMUM | | OUTSIDE DIAMETER | 5.400 INCHES MINIMUM AND 5.460 INCHES MAXIMUM | | OVERALL HEIGHT | 0.500 INCHES NOMINAL | | SPECIAL FEATURES | 1 EA 2.000 IN. MIN AND 2.100 IN. MAX LG OBLONG CUTOUT W/0.520 IN. MIN AND 0.580 IN. MAX RADIUS ENDS,CENTER OF CUTOUT LOCATED 2.000 IN. MIN AND 2.100 IN. MAX FROM CENTER OF WASHER W/PART OF CUTOUT OPEN T0 OUTSIDE DIA | | STYLE DESIGNATOR | ROUND, FLAT |
|
|