|
|
|
National Stock Number:
5970-01-043-5256
Federal Supply Class:
5970
National Item Identification Number:
010435256
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 0N173510-1 | 98230 | NATIONAL SECURITY AGENCY |
|
Techincal Specification:
| INSIDE DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM | | MATERIAL AND LOCATION | OVERALL PLASTIC, MYLAR FILM, TYPE A, E I DUPONT DE NEMOURS AND CO INC | | OUTSIDE DIAMETER | 0.218 INCHES NOMINAL | | OVERALL HEIGHT | 0.005 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND, FLAT | | TEST DATA DOCUMENT | 98230-0N173510-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|