| DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | 0.680 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 180.0 NOMINAL AS SUPPLIED |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| COLOR | BLACK |
| DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | 200.0 VOLTS PER MIL /0.001 INCH/ |
| DISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END | 1.150 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| DISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END | 2.110 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| ENVIRONMENTAL PROTECTION | FLAME RESISTANT AND MILDEW RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| FLEXIBILITY | FLEXIBLE |
| HEIGHT | 1.730 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| LARGE END WALL THICKNESS OF MAIN BODY | 0.080 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| MAIN BODY LARGE END INSIDE DIAMETER | 1.080 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| MAIN BODY LARGE END INSIDE DIAMETER | 1.730 INCHES MINIMUM AS SUPPLIED |
| MAIN BODY SMALL END INSIDE DIAMETER | 0.370 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| MAIN BODY SMALL END INSIDE DIAMETER | 1.730 INCHES MINIMUM AS SUPPLIED |
| MATERIAL DOCUMENT AND CLASSIFICATION | RT-602,RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED |
| MATERIAL | RUBBER SILICONE LOCATION NOT OTHERWISE SPECIFIED |
| MINIMUM TENSILE STRENGTH | 600 POUNDS PER SQUARE INCH |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SMALL END WALL THICKNESS OF MAIN BODY | 0.080 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| STYLE DESIGNATOR | BOOT-90 DEGREES |
| TEMP RATING | -75.0 CELSIUS |