|
|
|
National Stock Number:
5970-01-079-5787
Federal Supply Class:
5970
National Item Identification Number:
010795787
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| SW3201-85-1 | 91836 | WINCHESTER INTERCONNECT CORPORATION | | SW3201-85-1M99 | 91836 | WINCHESTER INTERCONNECT CORPORATION |
|
Techincal Specification:
| INSIDE DIAMETER | 0.254 INCHES MINIMUM AND 0.257 INCHES MAXIMUM | | MATERIAL AND LOCATION | OVERALL POLYAMIDE NYLON, L-P-410, NYLON 6/6, NATURAL, WITH OR WITHOUT FILLERS | | OUTSIDE DIAMETER | 0.416 INCHES MINIMUM AND 0.431 INCHES MAXIMUM | | OVERALL HEIGHT | 0.039 INCHES MINIMUM AND 0.041 INCHES MAXIMUM | | SPECIAL FEATURES | SURFACE ROUGHNESS 63 MICRO IN. RMS MAX | | STYLE DESIGNATOR | ROUND, FLAT |
|
|