|
|
|
National Stock Number:
5970-01-109-8430
Federal Supply Class:
5970
National Item Identification Number:
011098430
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 2264-N385 | 06540 | NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV | | 2264-N385 | 1YGB8 | CAREY MANUFACTURING CO, INC | | 2800-28-0005 | 23338 | WAVETEK U S INC DIV OF WAVETEK CORP |
|
Techincal Specification:
| STYLE DESIGNATOR | ROUND, FLAT | | INSIDE DIAMETER | 0.385 INCHES MINIMUM AND | | 0.395 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.620 INCHES MINIMUM AND | | 0.640 INCHES MAXIMUM | | OVERALL HEIGHT | 0.031 INCHES NOMINAL | | MATERIAL AND LOCATION | OVERALL PLASTIC, L-P-410 OR | | OVERALL PLASTIC, POLYAMIDE, MIL-M-20693, COMP A, TYPE 1 | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 06540 | | DESIGN CONTROL REFERENCE | 2264-N385 |
|
|