|
|
|
National Stock Number:
5970-01-177-9342
Federal Supply Class:
5970
National Item Identification Number:
011779342
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 0601C0024-5 | 03538 | LOCKHEED MARTIN CORPORATION | | 17307-7 | 08YX1 | L3 TECHNOLOGIES, INC. | | 2254-PH116 | 06540 | NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV | | 2254-PH116 | 1YGB8 | CAREY MANUFACTURING CO, INC | | 5924701-3 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| INSIDE DIAMETER | 0.116 INCHES MINIMUM AND 0.126 INCHES MAXIMUM | | MATERIAL AND LOCATION | OVERALL PLASTIC, PHENOLIC, L-P-513 | | PROPRIETARY CHARACTERISTICS | PACS | | OUTSIDE DIAMETER | 0.245 INCHES MINIMUM AND 0.265 INCHES MAXIMUM | | OVERALL HEIGHT | 0.031 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND, FLAT |
|
|