| DISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END | 1.560 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| DISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY | 0.370 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 45.0 NOMINAL AS SUPPLIED |
| ANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG | 90.0 NOMINAL AFTER UNRESTRICTED RECOVERY |
| COLOR | BLACK |
| DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | 300.0 VOLTS PER MIL /0.001 INCH/ |
| DISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END | 0.660 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT |
| FLEXIBILITY | SEMIRIGID |
| HEIGHT | 1.300 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| LARGE END WALL THICKNESS OF MAIN BODY | 0.110 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| MAIN BODY LARGE END INSIDE DIAMETER | 0.700 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| MAIN BODY LARGE END INSIDE DIAMETER | 0.940 INCHES MINIMUM AS SUPPLIED |
| MAIN BODY SMALL END INSIDE DIAMETER | 0.220 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| MAIN BODY SMALL END INSIDE DIAMETER | 0.460 INCHES MINIMUM AS SUPPLIED |
| MATERIAL DOCUMENT AND CLASSIFICATION | RT-1325,RAYCHEM CORP MFR REF SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED |
| MATERIAL | RUBBER LOCATION NOT OTHERWISE SPECIFIED |
| MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH |
| SMALL END WALL THICKNESS OF MAIN BODY | 0.040 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| SPECIAL FEATURES | INCLUDES MOLDING PORTS |
| STYLE DESIGNATOR | BOOT-90 DEGREES |