|
|
|
National Stock Number:
5970-01-294-6420
Federal Supply Class:
5970
National Item Identification Number:
012946420
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 120843-11 | 94271 | LOCKHEED MARTIN CORP | | LO1618 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) |
|
Techincal Specification:
| IDENTIFICATION CODE COLOR | NATURAL | | INSIDE DIAMETER | 0.257 INCHES NOMINAL | | MATERIAL AND LOCATION | OVERALL NYLON,GLASS FIBER,L-P-395,TYPE 1,GRADE A,CLASS 1-CANCELED | | OUTSIDE DIAMETER | 0.492 INCHES NOMINAL | | OVERALL HEIGHT | 0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | A REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL. MANUFACTURING AND TESTINGSPECIFICATION AVAILABLE AT THE DLA ICP | | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTSOF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO.LO1618" | | STYLE DESIGNATOR | ROUND, FLAT |
|
|