| COLOR | BLACK |
| DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS | 200.0 VOLTS PER MIL /0.001 INCH/ |
| END LARGEST DIAMETER | 0.570 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND WATER RESISTANT |
| FLEXIBILITY | FLEXIBLE |
| HEIGHT | 0.730 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| LARGE END WALL THICKNESS OF MAIN BODY | 0.060 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| LIP HEIGHT | 0.120 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| LIP WIDTH | 0.040 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| MAIN BODY LARGE END INSIDE DIAMETER | 0.880 INCHES MINIMUM AS SUPPLIED |
| MAIN BODY OVERALL LENGTH | 4.140 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| MAIN BODY SMALL END INSIDE DIAMETER | 0.250 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| MAIN BODY SMALL END INSIDE DIAMETER | 0.880 INCHES MINIMUM AS SUPPLIED |
| MAIN BODY LARGE END INSIDE DIAMETER | 0.450 INCHES MAXIMUM AFTER UNRESTRICTED RECOVERY |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-I-81765/1,TYPE II MIL SPEC SINGLE MATERIAL RESPONSE LOCATION NOT OTHERWISE SPECIFIED |
| MATERIAL | PLASTIC CROSS-LINKED POLYOLEFIN LOCATION NOT OTHERWISE SPECIFIED |
| MINIMUM TENSILE STRENGTH | 1200 POUNDS PER SQUARE INCH |
| SMALL END WALL THICKNESS OF MAIN BODY | 0.045 INCHES NOMINAL AFTER UNRESTRICTED RECOVERY |
| SPECIAL FEATURES | INSIDE ADHESIVE COATED; RED COLOR STRIPE; 4 DRAIN HOLES |
| STYLE DESIGNATOR | BOOT-90 DEGREES |
| TEMP RATING | -55.0 CELSIUS AND 135.0 CELSIUS |