|
|
|
National Stock Number:
5970-01-311-7920
Federal Supply Class:
5970
National Item Identification Number:
013117920
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 11429-201 | 94756 | THE BOEING COMPANY | | 11429-201-1 | 94756 | THE BOEING COMPANY |
|
Techincal Specification:
| INSIDE DIAMETER | 0.680 INCHES NOMINAL | | MATERIAL AND LOCATION | OVERALL PLASTIC, EPOXY, MIL-P-18177, TYPE GEE | | OUTSIDE DIAMETER | 1.350 INCHES NOMINAL | | OVERALL HEIGHT | 0.094 INCHES NOMINAL | | SPECIAL FEATURES | FROM CENTER TO FLAT END OF WASHER WIDTH IS 0.500 IN. |
|
|