|
|
|
National Stock Number:
5970-01-485-7568
Federal Supply Class:
5970
National Item Identification Number:
014857568
Description:
INSULATOR,WASHER
Detail:
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
|
Manufacturer Information:
| 6301800 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 6301800-2 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| INSIDE DIAMETER | 0.140 INCHES MINIMUM AND 0.150 INCHES MAXIMUM | | OUTSIDE DIAMETER | 0.312 INCHES NOMINAL | | OVERALL HEIGHT | 0.011 INCHES NOMINAL | | MATERIAL | COPPER OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | WASHER, SHIM | | SPECIAL FEATURES | DIMENSIONS APPLY BEFORE PLATING, NHA IS HEAT SINK PLATE ASSEMBLY (NSN 5999-01-269-0251) | | STYLE DESIGNATOR | ROUND, FLAT | | SURFACE TREATMENT AND LOCATION | OVERALL TIN PLATED, MIL-T-10727, TYPE 1 |
|
|