|
|
|
National Stock Number:
5975-00-240-2735
Federal Supply Class:
5975
National Item Identification Number:
002402735
Description:
ELBOW,ELECTRICAL CONDUIT
Detail:
AN ITEM FABRICATED IN THE FORM OF AN ELBOW AND HAVING BOTH ENDS THREADED FEMALE, OR WITH UNTHREADED CONNECTING FACILITIES ON BOTH ENDS, OR CONNECTING FACILITIES ON BOTH ENDS, ONE OF WHICH IS A MALE THREAD WITHOUT BOSS OR SHOULDER. IF A LOCKNUT OR BONDNUT IS INCLUDED, IT SHALL NOT BE CONSIDERED AS A THREAD BOSS OR SHOULDER. IT IS PRIMARILY INTENDED TO CONNECT CONDUIT TO CONDUIT. IT MAY HAVE A REMOVABLE COVER TO FACILITATE PULLING WIRES, BUT DOES NOT INCLUDE FACILITIES FOR MOUNTING WIRING DEVICES. FOR ITEMS HAVING A REMOVABLE COVER TO FACILITATE PULLING WIRES AND SPECIFICALLY DESIGNED FOR CLOSE INSTALLATION IN EXPOSED OUTDOOR LOCATIONS AND WHICH MAY HAVE FACILITIES FOR AN OUTSIDE DRIVEN GROUND, SEE ENTRANCE ELBOW, ELECTRICAL. FOR ITEMS WITH ONE END HAVING A MALE THREAD WITH A BOSS OR SHOULDER, SEE BOX CONNECTOR, ELECTRICAL. FOR ITEMS HAVING A REMOVABLE SCREW CAP FOR PULLING WIRES, WITH THE CAP POSITIONED 45 DEGREES FROM THE CONNECTION FACILITIES, SEE ENTRANCE ELBOW, ELECTRICAL. FOR ITEMS FABRICATED IN THE FORM OF AN ELBOW HAVING BOTH ENDS THREADED MALE, SEE BEND, ELECTRICAL CONDUIT.
|
Manufacturer Information:
| 422208-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 | | EL195 | 15235 | CROUSE-HINDS CO | | ELM90-50 | 03743 | EGS ELECTRICAL GROUP APPLETON DIV | | EL195 | 77774 | CROUSE-HINDS LIGHTING |
|
Techincal Specification:
| CONDUIT TYPE ACCOMMODATED | RIGID METALLIC THICKWALL FIRST END | | CONDUIT TYPE ACCOMMODATED | RIGID METALLIC THICKWALL SECOND END | | DEFLECTION ANGLE | 90.0 DEGREES | | END TYPE | EXTERNAL THREAD SECOND END | | END TYPE | EXTERNAL THREAD FIRST END | | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF NEC CL.I, GP.CD;CL.II, GP.EFG;CL.III | | ITEM ACCOMMODATED TRADE SIZE | 0.500 INCHES FIRST END | | ITEM ACCOMMODATED TRADE SIZE | 0.500 INCHES SECOND END | | LEG END TO PLANE OF BEND DISTANCE | 1.500 INCHES NOMINAL FIRST END | | LEG END TO PLANE OF BEND DISTANCE | 1.500 INCHES NOMINAL SECOND END | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-I-666 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | IRON ALLOY | | STYLE DESIGNATOR | STANDARD | | SURFACE TREATMENT | PAINT |
|
|