|
|
|
National Stock Number:
5975-00-816-6119
Federal Supply Class:
5975
National Item Identification Number:
008166119
Description:
BOOT,DUST AND MOISTURE SEAL
Detail:
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 2233041 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 9182548 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | M5423-09-05 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-5423/09 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILB5423-9 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | N9065-3-8 | 97539 | APM HEXSEAL CORP |
|
Techincal Specification:
| BASE THREAD LOCATION | INTERNAL | | BODY HEIGHT | 0.243 INCHES NOMINAL | | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DUSTPROOF-NEMA TYPE 13 AND WATERTIGHT-NEMA TYPE 4 | | OVERALL HEIGHT | 0.239 INCHES NOMINAL | | MATERIAL | RUBBER SILICONE BODY | | MOUNTING DEVICE QUANTITY | 1 | | MOUNTING METHOD | INTEGRAL THREADED NUT | | NOMINAL THREAD SIZE | 0.625 INCHES | | OPENING INSIDE DIAMETER | 0.750 INCHES NOMINAL | | SEALING METHOD | COMPRESSION | | STYLE DESIGNATOR | THRU-HOLE | | TEST DATA DOCUMENT | 81349-MIL-B-5423 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD LENGTH | 0.175 INCHES NOMINAL | | THREAD CLASS | 2B | | THREAD SERIES | UNEF | | THREAD QUANTITY PER INCH | 24 |
|
|