|
|
|
National Stock Number:
5977-00-212-6047
Federal Supply Class:
5977
National Item Identification Number:
002126047
Description:
BRUSH,ELECTRICAL CONTACT
Detail:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
|
Manufacturer Information:
| K9400355 | 24446 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| STYLE DESIGNATOR | PAIRED | | MATERIAL | CARBON | | BODY STYLE | RECTANGULAR COMMUTATOR | | MATERIAL DOCUMENT AND CLASSIFICATION | STACKPOLE CARBON CO,GR 50 MFR REF SINGLE MATERIAL RESPONSE | | WIDTH | 1.125 INCHES NOMINAL | | THICKNESS | 0.438 INCHES NOMINAL | | LENGTH | 1.312 INCHES NOMINAL | | CONTACT FACE STYLE | CONCAVE ON BEVEL | | RADIUS | 1.625 INCHES NOMINAL | | BEVEL ANGLE | 30.0 DEGREES NOMINAL | | TOP STYLE | BEVELED FRONT | | ANGLE | 30.0 DEGREES NOMINAL | | CLIP TYPE | NEMA HAMMER TYPE OFFSET A | | SHUNT INSULATION PROVISION AND QUANTITY | 4 UNINSULATED | | SHUNT POSITION DESIGNATOR | 1 AND | | 3 | | BRUSH SHUNT LENGTH | 1.500 INCHES NOMINAL SINGLE SHUNT | | TERMINAL TYPE AND QUANTITY | 1 STRAIGHT W/HOLE | | TERMINAL HOLE DIAMETER | 0.047 INCHES NOMINAL | | SPECIAL FEATURES | VEVELED EDGE LOCATION FRONT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 24446 | | DESIGN CONTROL REFERENCE | K9400355 |
|
|