|
|
|
National Stock Number:
5977-00-230-6009
Federal Supply Class:
5977
National Item Identification Number:
002306009
Description:
BRUSH,ELECTRICAL CONTACT
Detail:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
|
Manufacturer Information:
| 19-946-7 | 75377 | KURZ & ROOT GENERATOR COMPANY, LLC | | 946-7 | 75377 | KURZ & ROOT GENERATOR COMPANY, LLC |
|
Techincal Specification:
| BEVEL ANGLE | 15.0 DEGREES NOMINAL | | BODY STYLE | RECTANGULAR COMMUTATOR | | BRUSH SHUNT LENGTH | 3.375 INCHES MINIMUM AND 3.500 INCHES MAXIMUM ALL SHUNTS | | CONTACT FACE STYLE | BEVELED | | LENGTH | 1.500 INCHES MINIMUM AND 1.531 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | SPEER CARBON GRADE E44 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | CARBON | | OUTER EDGE TO SLOT EDGE DISTANCE | 0.328 INCHES NOMINAL | | SHUNT INSULATION PROVISION AND QUANTITY | 2 UNINSULATED | | SHUNT POSITION DESIGNATOR | 2 AND 8 | | SLOT DEPTH | 0.062 INCHES NOMINAL | | SLOT WIDTH | 0.344 INCHES NOMINAL | | STYLE DESIGNATOR | ONE PIECE | | WIDTH | 0.996 INCHES MINIMUM AND 1.000 INCHES MAXIMUM | | TERMINAL SLOT WIDTH | 0.219 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 1 STRAIGHT W/SLOT | | THICKNESS | 0.496 INCHES MINIMUM AND 0.500 INCHES MAXIMUM | | TOP STYLE | FLAT WITH RECTANGULAR SLOT |
|
|