|
|
|
National Stock Number:
5977-00-232-5339
Federal Supply Class:
5977
National Item Identification Number:
002325339
Description:
BRUSH,ELECTRICAL CONTACT
Detail:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
|
Manufacturer Information:
| 809637 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 809637 | 24617 | GENERAL MOTORS CORP | | 809637 | 80751 | U S INDUSTRIES INC |
|
Techincal Specification:
| BEVEL ANGLE | 9.0 DEGREES NOMINAL | | BODY STYLE | RECTANGULAR | | CONTACT FACE STYLE | BEVELED | | LENGTH | 0.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SPEER CARBON CO,GR OMEGA 15 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | CARBON GRAPHITE | | OUTER EDGE TO SLOT EDGE DISTANCE | 0.250 INCHES NOMINAL | | SLOT DEPTH | 0.250 INCHES NOMINAL | | SLOT WIDTH | 0.250 INCHES NOMINAL | | SPECIAL FEATURES | 1 / 32 X 45 DEGREE CHAMFER ON ONE EDGE | | STYLE DESIGNATOR | ONE PIECE | | WIDTH | 0.750 INCHES NOMINAL | | THICKNESS | 0.250 INCHES NOMINAL | | TOP STYLE | FLAT WITH U SHAPED SLOT |
|
|