|
|
|
National Stock Number:
5977-00-250-9279
Federal Supply Class:
5977
National Item Identification Number:
002509279
Description:
BRUSH,ELECTRICAL CONTACT
Detail:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
|
Manufacturer Information:
| 1334434 | 03494 | AMETEK ADVANCED INDUSTRIES, INC. | | ANSI/NEMA PUB N0 CB1 | 81705 | NATIONAL ELECTRICAL MFRS ASSN | | ANSI/NEMA PUB NO CB1 | 81705 | NATIONAL ELECTRICAL MFRS ASSN |
|
Techincal Specification:
| STYLE DESIGNATOR | ONE PIECE | | MATERIAL | ELECTROGRAPHITIC | | BODY STYLE | RECTANGULAR COMMUTATOR | | MATERIAL DOCUMENT AND CLASSIFICATION | GENERAL ELECTRIC CO,GR C MFR REF SINGLE MATERIAL RESPONSE | | WIDTH | 1.250 INCHES NOMINAL | | THICKNESS | 0.500 INCHES NOMINAL | | LENGTH | 1.250 INCHES NOMINAL | | CONTACT FACE STYLE | BEVELED | | BEVEL ANGLE | 15.0 DEGREES NOMINAL | | TOP STYLE | CONVEX ON BEVEL | | CONVEX RADIUS | 1.000 INCHES NOMINAL | | CURVATURE CENTER TO BRUSH LONG SIDE DISTANCE | 0.046 INCHES NOMINAL | | SHUNT INSULATION PROVISION AND QUANTITY | 1 UNINSULATED | | SHUNT POSITION DESIGNATOR | 8 | | BRUSH SHUNT LENGTH | 1.625 INCHES NOMINAL SINGLE SHUNT | | TERMINAL TYPE AND QUANTITY | 1 STRAIGHT W/SLOT | | TERMINAL SLOT WIDTH | 0.188 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | MATT AND | | MDCL | | PERIPHERAL SPEED | 6000 FEET PER MINUTE |
|
|