|
|
|
National Stock Number:
5977-00-606-4059
Federal Supply Class:
5977
National Item Identification Number:
006064059
Description:
BRUSH,ELECTRICAL CONTACT
Detail:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
|
Manufacturer Information:
| 530857 | 06987 | FL AEROSPACE CORP JANITROL AERO DIV/GENERAL DESIGN | | N0REF | 99200 | EVERAXIS USA, INC. |
|
Techincal Specification:
| BODY STYLE | RECTANGULAR SLIP RING | | CLIP TYPE | NEMA LIFTING TYPE E | | COMPONENT BRUSH QUANTITY PER MULTIPLE BRUSH | 4 | | CONTACT FACE STYLE | FLAT | | DISTANCE BETWEEN HOLE CENTERS | 0.437 INCHES NOMINAL | | DISTANCE FROM BRUSH TOP TO HOLE CENTERLINE | 0.080 INCHES NOMINAL | | DISTANCE FROM CENTER OF HOLE TO OUTSIDE EDGE | 0.080 INCHES NOMINAL | | HOLE DIAMETER | 0.082 INCHES NOMINAL | | SPECIAL FEATURES | GRAPHITIC COMPOSITION SPRING TEMPERED ALLOY RD WIRE BRUSHES MOLDED IN THERMOPLASTIC FORMULATED COMPOUND INSULATING MATERIAL LIFTING TYPE RINGLET CLIP BRUSHES EXTENDED THRU INSULATING BLOCK FOR TERMINAL CONNECTION | | STYLE DESIGNATOR | MULTIPLE | | TOP STYLE | ANGULAR CYLINDRICAL HEAD |
|
|