|
|
|
National Stock Number:
5977-00-611-5445
Federal Supply Class:
5977
National Item Identification Number:
006115445
Description:
BRUSH,ELECTRICAL CONTACT
Detail:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
|
Manufacturer Information:
| 701A385P2 | 30221 | GENERAL ELECTRIC CO ARMAMENT AND ELECTRICAL SYSTEMS DEPT ELECTRICAL SYSTEMS PRODUCTS DEPT | | M-701A385P2 | 18783 | MIRAJ CORP |
|
Techincal Specification:
| ANGLE | 30.0 DEGREES NOMINAL | | BEVEL ANGLE | 15.0 DEGREES NOMINAL | | BODY STYLE | RECTANGULAR COMMUTATOR | | BRUSH SHUNT LENGTH | 1.875 INCHES NOMINAL SINGLE SHUNT | | CLIP BEVEL ANGLE IN DEG | 30.0 NOMINAL | | CLIP LENGTH | 0.341 INCHES MINIMUM AND 0.376 INCHES MAXIMUM | | CLIP TYPE | NEMA HAMMER TYPE ANGULAR A-EXTENDED | | CONTACT FACE STYLE | CONCAVE ON BEVEL | | LENGTH | 2.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | CARBONE CARBON GRADE 51 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | ELECTROGRAPHITIC | | RADIUS | 1.312 INCHES NOMINAL | | SHUNT INSULATION PROVISION AND QUANTITY | 1 INSULATED | | SHUNT POSITION DESIGNATOR | 3 | | STYLE DESIGNATOR | ONE PIECE | | WIDTH | 0.500 INCHES MAXIMUM | | TERMINAL HOLE DIAMETER | 0.203 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 1 STRAIGHT W/HOLE | | THICKNESS | 0.247 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | TOP STYLE | BEVELED FRONT |
|
|