|
|
|
National Stock Number:
5977-01-123-2818
Federal Supply Class:
5977
National Item Identification Number:
011232818
Description:
BRUSH,ELECTRICAL CONTACT
Detail:
AN ITEM SPECIFICALLY DESIGNED TO BE USED IN THE TRANSFER OF ELECTRICAL ENERGY TO OR FROM ANOTHER CONDUCTING SURFACE. EITHER THE BRUSH OR THE SURFACE IS CONTINUALLY MOVING DURING THE TRANSFER OF ENERGY. THE BRUSH IS USUALLY COMPOSED IN PART OF SOME FORM OF THE ELEMENT CARBON. INCLUDES: (1) A SINGLE BRUSH EITHER WITH OR WITHOUT AN ATTACHED SHUNT (FLEXIBLE WIRE LEAD) AND/OR A HELICAL OR FLAT TYPE PRESSURE SPRING; (2) A SPLIT BRUSH COMPOSED OF TWO OR MORE PIECES (WAFERS), WHICH ARE USED IN PLACE OF ONE BRUSH USUALLY CONNECTED TOGETHER BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL; (3) PAIRED BRUSHES COMPOSED OF TWO IDENTICAL OR NON-IDENTICAL BRUSHES CONNECTED TOGETHER BY A COMMON SHUNT EITHER WITH OR WITHOUT PRESSURE SPRINGS OR CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE EITHER WITH OR WITHOUT INDIVIDUAL SHUNTS; (4) MULTIPLE BRUSHES COMPOSED OF MORE THAN TWO IDENTICAL OR NON-IDENTICAL BRUSHES WITHOUT PRESSURE SPRINGS CONNECTED BY INDIVIDUAL SHUNTS TO A COMMON TERMINAL, OR WITH PRESSURE SPRINGS AND CONNECTED TO A COMMON BAR, BRACKET OR THE LIKE BY INDIVIDUAL SHUNTS. DOES NOT INCLUDE MOVING CONTACTS WHICH MAKE AND SLIDE PAST STATIONARY CONTACTS, BUT ARE STATIONARY WHILE THE CIRCUIT IS CONDUCTING, SUCH AS THE SLIDING CONTACTS ON A RHEOSTAT OR THE STATIONARY CONTACT ON A SYNCHRO. EXCLUDES: CONTACT, ELECTRICAL; AND CONTACT ASSEMBLY, ELECTRICAL.
|
Manufacturer Information:
| 402-3302-1 | 27304 | KOLLMORGEN CORP MAGNEDYNE DIV |
|
Techincal Specification:
| BODY STYLE | RECTANGULAR | | CONTACT FACE STYLE | FLAT | | LARGEST OUTSIDE DIAMETER | 0.160 INCHES NOMINAL | | LENGTH | 0.435 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SUPERIOR CARBON,GRADE AB-54 MFR REF SINGLE MATERIAL RESPONSE | | MATERIAL | CARBON | | PRESSURE SPRING TYPE AND QUANTITY | 1 CYLINDRICAL | | SHUNT INSULATION PROVISION AND QUANTITY | 1 UNINSULATED | | SHUNT POSITION DESIGNATOR | 5 | | SPECIAL FEATURES | ONE CORNER OF BODY NOTCHED 90.0 DEG BY 0.040 IN. MIN AND 0.060 IN. MAX DEEP,0.250 IN. CENTER OF NOTCH TO CONTACT FACE | | SPRING FREE LENGTH | 1.400 INCHES NOMINAL | | STYLE DESIGNATOR | ONE PIECE | | TERMINAL DIAMETER | 0.307 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | TERMINAL TYPE AND QUANTITY | 1 ROUND CAP | | THICKNESS | 0.123 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | WIDTH | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
|
|