| STYLE DESIGNATOR | OFFSET BEND TYPE |
| CROSS-SECTIONAL SHAPE STYLE | INTERNAL, RECTANGULAR DOUBLE RIDGED EXTERNAL, RECTANGULAR |
| TUBING WALL CONSTRUCTION STYLE | SEAMLESS FIRST TUBING SEGMENT |
| CONVOLUTE SECOND TUBING SEGMENT |
| FLANGE QUANTITY | 2 |
| FLANGE CONNECTING FACILITY AND QUANTITY | 2 THREADED HOLE ALL FLANGES FIRST CONNECTION FACILITY |
| 2 UNTHREADED HOLE ALL FLANGES SECOND CONNECTION FACILITY |
| FLEXIBILITY | RIGID FIRST TUBING SEGMENT |
| FLEXIBLE SECOND TUBING SEGMENT |
| MATERIAL | ALUMINUM ALLOY FIRST TUBING SEGMENT |
| COPPER ALLOY SECOND TUBING SEGMENT |
| RUBBER CHLOROPRENE OR |
| RUBBER SILICONE SINGLE TUBING JACKET |
| WAVEGUIDE LENGTH | 17.720 INCHES MINIMUM AND |
| 17.780 INCHES MAXIMUM |
| WAVEGUIDE CENTER TO CENTER DISTANCE | 1.020 INCHES MINIMUM AND |
| 1.100 INCHES MAXIMUM |
| WAVEGUIDE OUTSIDE WIDTH | 0.791 INCHES NOMINAL |
| WAVEGUIDE INSIDE WIDTH | 0.691 INCHES NOMINAL |
| WAVEGUIDE INSIDE HEIGHT | 0.321 INCHES NOMINAL |
| WAVEGUIDE OUTSIDE HEIGHT | 0.421 INCHES NOMINAL |
| TUBING TWIST TYPE | STRAIGHT TWIST FIRST TUBING SEGMENT |
| TUBING TWIST ANGLE IN DEG | 37.5 FIRST TUBING SEGMENT |
| SURFACE TREATMENT | SILVER SECOND TUBING SEGMENT ALL SURFACES |
| FLANGE CONNECTING HOLE DIAMETER | 0.095 INCHES MINIMUM AND |
| 0.096 INCHES MAXIMUM ALL FLANGES SECOND CONNECTION FACILITY |
| THREAD SERIES DESIGNATOR | UNC ALL FLANGES FIRST CONNECTION FACILITY |
| NOMINAL THREAD SIZE | 0.138 INCHES ALL FLANGES FIRST CONNECTION FACILITY |
| THREAD CLASS | 2B ALL FLANGES FIRST CONNECTION FACILITY |
| THREAD DIRECTION | RIGHT-HAND ALL FLANGES FIRST CONNECTION FACILITY |
| VOLTAGE STANDING WAVE RATIO | 1.40 |
| SPECIAL FEATURES | FLEXIBLE PORTION COVERED W/ MOLDED NEOPRENE OR SILICONE JACKET DEPENDING ON USE; RIGID SECTION HAS BOSS PER MS33649-3; NEITHER FLANGE PRESSURIZED |
| PRECIOUS MATERIAL | SILVER |
| PRECIOUS MATERIAL AND LOCATION | WAVEGUIDE SURFACES SILVER |
| SUPPLEMENTARY FEATURES | SECOND 52.5 DEG TWIST IN 1ST TUBING SEGMENT; MARKED ONE END W/ARROW AND LETTERS FWD |