| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
| APPLICATION DESIGN | TRANSMISSION LINE |
| ATTENUATION VARIATION METHOD | CONTINUOUS |
| BODY LENGTH | 1.500 INCHES NOMINAL |
| BODY STYLE | COAXIAL TYPE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.219 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.219 INCHES NOMINAL |
| COAXIAL CONNECTOR SERIES DESIGNATION | BRM |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL |
| FLAT HEIGHT | 0.125 INCHES NOMINAL |
| FREQUENCY RANGE | 2.850 GIGAHERTZ MINIMUM AND 3.160 GIGAHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 10.0 |
| OVERALL HEIGHT | 1.250 INCHES NOMINAL |
| OVERALL LENGTH | 2.260 INCHES NOMINAL |
| OVERALL WIDTH | 1.500 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR |
| POWER RATING | 6.0 WATTS AVERAGE |
| SHAFT DIAMETER | 0.375 INCHES NOMINAL |
| SHAFT TYPE | ROUND, FLATTED |
| SHAFT LENGTH | 0.750 INCHES NOMINAL |
| VOLTAGE STANDING WAVE RATIO | 1.50 |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, MALE |
| TEST DATA DOCUMENT | 97942-128C500H01 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES NOMINAL |