|
|
|
National Stock Number:
5985-01-054-6587
Federal Supply Class:
5985
National Item Identification Number:
010546587
Description:
ATTENUATOR,VARIABLE
Detail:
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).
|
Manufacturer Information:
| 0N199775 | 98230 | NATIONAL SECURITY AGENCY | | 50V60-601 | 58880 | MEGGITT (NEW HAMPSHIRE), INC |
|
Techincal Specification:
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT | | APPLICATION DESIGN | TRANSMISSION LINE | | ATTENUATION PER STEP IN DECIBELS | 6.0 | | ATTENUATION VARIATION METHOD | STEPPED | | BODY STYLE | RECTANGULAR, TERMINALS ON ONE SURFACE | | BUSHING LENGTH | 0.320 INCHES NOMINAL | | COAXIAL CONNECTOR SERIES DESIGNATION | SM | | FIRST FLAT LENGTH | 0.380 INCHES MINIMUM | | FLAT HEIGHT | 0.218 INCHES NOMINAL | | FREQUENCY RANGE | 1.000 MEGAHERTZ MINIMUM AND 30.000 MEGAHERTZ MAXIMUM | | OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 60.0 | | OVERALL HEIGHT | 2.000 INCHES MAXIMUM | | OVERALL LENGTH | 4.570 INCHES MAXIMUM | | OVERALL WIDTH | 1.000 INCHES NOMINAL | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT LENGTH | 0.670 INCHES NOMINAL | | SHAFT TYPE | ROUND, FLATTED | | STEP POSITION QUANTITY | 10 | | TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, MALE | | TEST DATA DOCUMENT | 98230-0N199775 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|