| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT |
| APPLICATION DESIGN | TRANSMISSION LINE |
| ATTENUATION PER STEP IN DECIBELS | 1.0 |
| ATTENUATION VARIATION METHOD | STEPPED |
| BODY STYLE | COAXIAL TYPE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.120 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.120 INCHES NOMINAL |
| COAXIAL CONNECTOR SERIES DESIGNATION | TNC |
| FREQUENCY RANGE | 0.000 GIGAHERTZ MINIMUM AND 2.000 GIGAHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.3 |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | -0.10 TO 0.50 |
| OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 10.0 |
| OVERALL HEIGHT | 2.590 INCHES NOMINAL |
| OVERALL LENGTH | 3.000 INCHES NOMINAL |
| OVERALL WIDTH | 1.870 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.164 INCHES |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING THREAD QUANTITY | 32 PER INCH |
| POWER RATING | 1.0 KILOWATTS PEAK |
| SCALE DIVISION QUANTITY | 10 |
| SCALE LINEARITY | LINEAR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT LENGTH | 0.750 INCHES NOMINAL |
| SHAFT TYPE | ROUND |
| STEP POSITION QUANTITY | 10 |
| VOLTAGE STANDING WAVE RATIO | 1.20 |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, MALE |
| VERNIER SCALE DIVISION QUANTITY | 10 |