| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 3.000 INCHES NOMINAL |
| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 ELECTRONIC, PROGRAMMABLE |
| ATTENUATION VARIATION METHOD | STEPPED |
| BODY STYLE | IRREGULAR |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.450 INCHES NOMINAL |
| COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
| FREQUENCY RANGE | 0.000 GIGAHERTZ MINIMUM AND 4.000 GIGAHERTZ MAXIMUM |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 1.000 |
| III APPLICATION DESIGN | TRANSMISSION LINE OR WAVEGUIDE |
| III FUNCTIONAL DESCRIPTION | FOR USE IN HIGH RELIABILITY GRND AND AIRBORNE ELECTRONIC EQUIPMENT |
| III OPERATING TEMP RANGE | -20.0 TO 75.0 DEG CELSIUS |
| IMPEDANCE RATING IN OHMS | 50.000 INPUT-OUTPUT |
| POWER RATING | 1.0 WATTS AVERAGE AND 100.0 WATTS PEAK |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| MOUNTING THREAD QUANTITY | 40 PER INCH |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | +0.200 TO 0.500 |
| OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 11.0 |
| OVERALL HEIGHT | 1.750 INCHES NOMINAL |
| OVERALL LENGTH | 5.210 INCHES NOMINAL |
| OVERALL WIDTH | 0.090 INCHES NOMINAL |
| SPECIAL FEATURES | SOLENOID DRIVE PLUG IS FURNISHED WITH A 5 FT CABLE; STORAGE TEMP RANGE -55C TO +85C; ALTITUDE; 15000 FT OPER ATING; 50000 FT NON-OPERATING |
| VOLTAGE STANDING WAVE RATIO | 1.50 |
| STEP POSITION QUANTITY | 11 |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, MALE |
| TEST DATA DOCUMENT | 98230-0N516445 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |