5985-01-150-6323, ATTENUATOR,VARIABLE

5935-01-150-6324 CONNECTOR,PLUG,ELECTRICAL

National Stock Number:
5985-01-150-6323

Federal Supply Class:
5985

National Item Identification Number:
011506323

Description:
ATTENUATOR,VARIABLE

Detail:
A device for reducing the strength of an alternating current signal either continuously or in steps, without causing appreciable signal distortion, by maintaining substantially constant output and/or input impedance match. Continuously variable resistive devices must consist of at least two sections or one section with at least two rotating contacts. The item must have an overall attenuation rating. Includes tandem mounted variable resistors designed to function as an attenuator but whose terminals are not connected. See also RESISTOR, VAIABLE (as modified).

Manufacturer Information:

100C0912

28983

DAICO INDUSTRIES, INC.

Techincal Specification:

ADJUSTMENT DEVICE TYPE AND QUANTITY	1 ELECTRONIC, VOLTAGE CONTROLLED
APPLICATION DESIGN	TRANSMISSION LINE
ATTENUATION VARIATION METHOD	CONTINUOUS
BODY STYLE	IRREGULAR
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	1.836 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH	1.336 INCHES NOMINAL
COAXIAL CONNECTOR SERIES DESIGNATION	SMA
FREQUENCY RANGE	20.000 MEGAHERTZ MINIMUM AND 500.000 MEGAHERTZ MAXIMUM
IMPEDANCE RATING IN OHMS	50.0 INPUT-OUTPUT
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS	3.0
OVERALL ATTENUATION RANGE IN DECIBELS	+0.0 TO 38.0
OVERALL HEIGHT	0.750 INCHES NOMINAL
OVERALL LENGTH	2.000 INCHES NOMINAL
OVERALL WIDTH	1.900 INCHES NOMINAL
MOUNTING FACILITY PATTERN	FOUR POSITION RECTANGULAR
MOUNTING FACILITY TYPE AND QUANTITY	4 UNTHREADED HOLE
VOLTAGE STANDING WAVE RATIO	1.25 AND 1.35 AND 1.50
TERMINAL TYPE AND QUANTITY	2 CONNECTOR, COAXIAL, FEMALE AND 4 SOLDER STUD
UNTHREADED MOUNTING HOLE DIAMETER	0.093 INCHES NOMINAL

Click here to Register for Free 30-day Trial