|
|
|
National Stock Number:
5985-01-504-8635
Federal Supply Class:
5985
National Item Identification Number:
015048635
Description:
DUMMY LOAD,ELECTRICAL
Detail:
A SPECIFIC ELECTRICAL ELEMENT OR SET OF ELECTRICAL ELEMENTS THAT ARE CONNECTED TOGETHER TO FORM A FIXED ARRANGEMENT AND USED AS A SUBSTITUTE LOAD FOR TERMINATING AN ELECTRICAL CIRCUIT. A DUMMY LOAD CONTAINS ALL THE ESSENTIAL ELECTRICAL CHARACTERISTICS NECESSARY TO TERMINATE THE CIRCUIT BUT DOES NOT FUNCTION IN THE SAME MANNER AS THE LOAD WHICH IT REPLACES. EXAMPLES ARE RESISTORS USED TO REPLACE ANTENNAS, BATTERIES, LOUDSPEAKERS, OR THE LIKE. INCLUDES SINGLE PORT TERMINATIONS OF TWIN LEAD, COAXIAL AND WAVEGUIDE TRANSMISSION LINES AS LOW POWER TERMINATIONS OF A SECTION OF A TRANSMISSION SYSTEM IN A SPECIFIED MANNER. INCLUDES DUMMY LOADS WHEN ARRANGED IN A GROUP OR BANK. EXCLUDES POWER ABSORBERS. SEE ALSO LOAD BANK, ELECTRICAL.
|
Manufacturer Information:
| M39030/6-03N | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-D-39030/6 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-39030/6 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| AMBIENT TEMP AT FULL RATED POWER | -55.0 CELSIUS AND 125.0 CELSIUS | | COAXIAL CONNECTOR SERIES DESIGNATION | N | | CONNECTOR END DESIGN | MALE | | COOLING METHOD | SELF-COOLED | | FREQUENCY RANGE RATING | +0.030 TO 12.400 GIGAHERTZ | | IMPEDANCE RATING IN OHMS | 50.0 NOMINAL | | OVERALL DIAMETER | 0.380 INCHES MAXIMUM | | OVERALL LENGTH | 1.510 INCHES MAXIMUM | | OPERATING POSITION | ALL POSITIONS | | POWER RATING | 1.000 WATTS AVERAGE AND 0.500 KILOWATTS PEAK | | SPECIAL FEATURES | MATERIALS: BODY AND CONNECTOR: CORROSION-RESISTANT STEEL; FINISH: NICKEL PLATED; CONTACT PIN AND SOCKET: BERYLLIUM COPPER | | SPECIFICATION/STANDARD DATA | 81349-MIL-D-39030/6 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | COAXIAL MOUNTED | | VOLTAGE STANDING WAVE RATIO FREQUENCY RANGE | +0.030 TO 12.400 GIGAHERTZ | | VOLTAGE STANDING WAVE RATIO | 1.10 | | TERMINATION TYPE | CONNECTION COAXIAL | | TEST DATA DOCUMENT | 81349-MIL-D-39030 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|